We are leading manufacturer & supplier of Lined Concentric Reducers in India
Click on Image to Enlarge Ask PriceNominal Bore | B1 | R/F 1 | B2 | R/F 2 | Face to Face (X) | Liner Thickness | Steel Thickness | |||
NB1 | NB2 | |||||||||
(mm) | (inches) | (mm) | (inches) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) |
40 | 1.5 | 25 | 1 | 127.0 | 73 | 108.0 | 51 | 114 | 4.0 | 8.0 |
50 | 2 | 25 | 1 | 152.4 | 92 | 108.0 | 51 | 127 | 4.0 | 8.0 |
50 | 2 | 40 | 1.5 | 152.4 | 92 | 127.0 | 73 | 127 | 4.0 | 8.0 |
80 | 3 | 25 | 1 | 190.5 | 127 | 108.0 | 51 | 152 | 4.0 | 8.0 |
80 | 3 | 40 | 1.5 | 190.5 | 127 | 127.0 | 73 | 152 | 4.0 | 8.0 |
80 | 3 | 50 | 2 | 190.5 | 127 | 152.4 | 92 | 152 | 4.0 | 8.0 |
100 | 4 | 25 | 1 | 228.6 | 158 | 108.0 | 51 | 178 | 4.0 | 9.0 |
100 | 4 | 40 | 1.5 | 228.6 | 158 | 127.0 | 73 | 178 | 4.0 | 9.0 |
100 | 4 | 50 | 2 | 228.6 | 158 | 152.4 | 92 | 178 | 4.0 | 9.0 |
100 | 4 | 80 | 3 | 228.6 | 158 | 190.5 | 127 | 178 | 4.0 | 9.0 |
150 | 6 | 50 | 2 | 279.4 | 216 | 152.4 | 92 | 229 | 4.0 | 11.0 |
150 | 6 | 80 | 3 | 279.4 | 216 | 190.5 | 127 | 229 | 4.0 | 11.0 |
150 | 6 | 100 | 4 | 279.4 | 216 | 228.6 | 158 | 229 | 4.0 | 11.0 |
200 | 8 | 100 | 4 | 342.9 | 270 | 228.6 | 158 | 279 | Upon Request | |
200 | 8 | 150 | 6 | 342.9 | 270 | 279.4 | 216 | 279 | ||
250 | 10 | 200 | 8 | 406.4 | 324 | 279.4 | 216 | 305 | ||
250 | 10 | 200 | 8 | 406.4 | 324 | 342.9 | 270 | 305 | ||
300 | 12 | 250 | 10 | 482.6 | 381 | 342.9 | 270 | 356 | ||
300 | 12 | 250 | 10 | 482.6 | 381 | 406.4 | 324 | 356 |
HOUSING MATERIAL
- Fabricated Flanges: Made from IS 2062 Plates
- Eccentric Reducer : ASTM A 234 Gr.WPB
- Cast : SG Iron to IS 1865 : 1991 Grade 400/15
- Lining : FEP
OPTIONS
- Flange : Rotating DIN PN 10/16, BS10, ASME 300, Mixed
- Extras : Earthing Studs/Lugs, Vent Extensions
- Material : Stainless Steel
- Lining : PFA/HDPE/PP
- Geometry : Non Standard Dimensions
DESIGN SPECIFICATION
- Flange : As per ANSI B 16.5/B 16.42
- Face to Face : As per ANSI B 16.5 # 150
- Lining Thickness : 3 to 5 mm
Other Flanges Drilling like DIN 2632/2633, BS 10 Table D, E or F are also available on request
TEST & INSPECTION DATA
Resins are conforming to the requirements of ASTM F 1545-97 (2003)
- Hydraulic Test : 20 Kg / Cm2 After Lining
- Spark Test : 15 KV D.C After Lining
Make Enquiry