We are leading manufacturer & supplier of Lined Equal Tees in India
| Nominal Bore NB | Center Line to face (X) | Flange OD (ØB) | Raised Face Dia (R/F) | Liner Thickness | Steel Thickness | |
| (mm) | (inches) | (mm) | (mm) | (mm) | (mm) | (mm) |
| 25 | 1 | 89 | 108.0 | 51 | 4.0 | 8.0 |
| 40 | 1.5 | 102 | 127.0 | 73 | 4.0 | 8.0 |
| 50 | 2 | 114 | 152.4 | 92 | 4.0 | 9.0 |
| 80 | 3 | 140 | 190.5 | 127 | 4.0 | 10.0 |
| 100 | 4 | 165 | 228.6 | 157 | 4.0 | 11.5 |
| 150 | 6 | 203 | 279.4 | 216 | 4.0 | 12.0 |
| 200 | 8 | 229 | 342.9 | 270 | Upon Request | |
| 250 | 10 | 279 | 406.4 | 324 | ||
| 300 | 12 | 305 | 482.6 | 381 | ||
HOUSING MATERIAL
- Fabricated : Flanges made from IS 2062 Plates
- Tee : Pipe as per ASTM A 106 Gr.B
- Cast Tee : SG Iron as per IS 1865-1991
- Lining : FEP
OPTIONS
- Flange : Rotating, Fixed On/Off center DIN PN 10/16, BS 10, ASME 300, Mixed
- Extras : Earthing Studs / Lugs, Vent Extensions
- Material : Stainless Steel
- Lining : PFA / HDPE / PP
- Geometry : Non Standard Dimensions
DESIGN SPECIFICATION
- Flange : As per ANSI B 16.5/B 6.42
- Face to Face : As per ANSI B 16.5 # 150
- Lining Thickness : 3 to 5 mm
Other Flange Drilling like DIN 2632/2633, BS 10 Table D, E or F are also available on request. Sizes above 6″ are fabricated from pipe
TEST & INSPECTION DATA
Resins are conforming to the requirements of ASTM F 1545-97 (2003)
- Hydraulic Test : 20 Kg / Cm2 After Lining
- Spark Test : 15 KV D.C After Lining
Make Enquiry
