Liner type Specification Properties
Virgin PTFE paste extruded ASTM D4895 Minimum Tensile Strength : 20.7MPa
Minimum Elongation of break : 200 to 300 %
Specific Gravity : 2.14-2.18 (when tested to ASTM D792 or D1505)
Static dissipating PTFE Paste Extruded ASTM D4895 Minimum Tensile Strength : 20.7MPa
Minimum Elongation of break : 200 to 300 %
Specific Gravity : 2.14-2.18 (when tested to ASTM D792 or D1505)
Volume Resistivity :
Virgin FEP ASTM D 2116 Minimum Tensile Strength : 20.7 MPa
Minimum Elongation of break : 250%
Specific gravity : 2.18
Virgin PFA ASTM D3307 Minimum Tensile Strength : 26.2 MPa
Minimum Elongation of break : 300%
Specific Gravity : 2.12 – 2.17 (when tested to ASTM D792 or D1505)
Melt flow rate : 1-2.5 g/10mins ( when tested to ASTM D3307 at 3720 C
Static Dissipating PFA ASTM D3307 Minimum Tensile Strength : 26.2 MPa
Minimum Elongation of break : 300%
Specific Gravity : 2.14-2.17 (when tested to ASTM D792 or D1505)
Melt flow rate : 1-2.5 g/10mins ( when tested to ASTM D3307 at 3720 C
Volume Resistivity :